Home Beverages How To Fix Cloudy Tap Water? By The Way, Can You Drink...

How To Fix Cloudy Tap Water? By The Way, Can You Drink It?

How To Fix Cloudy Tap Water

Among the most common reasons individuals call a plumber is because their tap water is cloudy. It is critical to have good-quality drinking water from the tap, and cloudy or yellowish water flowing from the faucet might create moderate anxiety. Some variations in tap water are impossible to spot with the naked sight, nose, or tongue. In contrast, others may get determined with simple testing. This article will explain why the tap water may be foggy, how to fix cloudy tap water, and how to determine whether the cloudy water is safe or not?

What Makes Water Cloudy?

Before going to How To Fix Cloudy Tap Water, let’s take a closer look at each of these reasons for cloudy water.

  • Air Bubbles

The most prevalent cause of murky tap water is air bubbles. The air hits the water when you turn on the kitchen faucet or water pumps from a well. High-pressure faucets are especially vulnerable to cloudy water.

High water force makes the air more soluble, leading to more air bubbles and cloudy water. A recent plumbing repair might also cause air to get trapped in the water. When a water pipe is broken open, the increased outside pressure drives air into the pipe, combining with the water to generate air bubbles that cloud it.

  • Hard Water

More than 85 % of American homes receive hard water. Hard water contains a lot of minerals like magnesium and calcium, which may make it seem murky or milky.

Greyish-white coatings on basins and dishes and reduced foam in washing and soap consumption are all signs that your water is hard.

  • Cold Weather

Cloudy water is standard when it is chilly outside. It is because the soluble air in the water rises as the temperature falls.

As a result, cold water contains more air than warm water. The water warms as it moves from such an ice reservoir to your faucet in the winter. A little amount of air is no longer soluble and ejected from the solution, leading to murky tap water.

  • High Water Pressure

Perhaps the water is hazy might be due to low water pressure. When water flows through the pipes, it is constantly under immense pressure, which aids in transporting water from the municipal reservoirs to the home.

When squeezed, microscopic water bubbles develop, creating a carbonated effect that veils the water. It’s also why, after a while, cloudy water from the faucet might clear.

  • Methane Gas

Although this is not a typical cause, methane gas pollution can cause murky tap water. Methane pollution in the tap water system is most common in oil or gas mining locations.

Thankfully, methane, a highly combustible gas, soon rises to the surface and evaporates when exposed to air. The cloudiness in methane-contaminated tap water gets caused by air bubbles formed as the gas enters the sky.

  • Sediment Build-up

Minerals and sediment can accumulate within your water heater. It might be the culprit if you only have hazy water when switching on your hot water.

How To Identify Cloudy Water?

Before we begin determining why the water is hazy, you’ll need a vital instrument—a transparent container.

That’s all. A glass, a bowl, a vintage jar, or a plastic container can all get used. It doesn’t matter; all that counts is that it can contain water and is transparent. Turn on your faucet until you have hot water, then fill the container with water for this test.

Put it on a level surface after it’s complete and keep an eye on it. It should be a little more enjoyable than watching paint dry. Focus on two things while inspecting your cloudy water:

  • Is the water clearer from the top-down or bottom-up?
  • If at all, how long would it take to clear?

Great, you have oxygen bubbles in the water if your glass clears after a few minutes and clears from the bottom up. If it removes from the top down and takes more time to clear, your water most likely contains sediment.

They may be working on a water main or anything similar if the water does not clear in 24hrs or is brown rather than white. Contact your water provider if this is the case.

How To Fix Cloudy Tap Water?

Here is the method to fix How To Fix Cloudy Tap Water

  • Pour The Water Into A Glass And Set It Aside

First and foremost, do not be concerned; it is easier than it looks, but you must remain relaxed. Allow the water in the glass to settle for a few moments. Tap water can become hazy due to trapped air in the water supply, and this air causes bubbles at the bottom of the glass. If this is the situation, the water will eventually clear. On the other hand, the trapped air must get flushed out of the system.

  • Fix an Aerator

Second, if your cold water supply is the problem, you may add an aerator to the tap or faucet.

The presence of air bubbles might indicate that the water system contains tiny particles such as sand or grit. As a result, you should contact a plumber or open up the whole system and inspect it if you have plumbing skills.

  • Iron test

Third, excessive iron levels might occasionally result in murky tap water. You may test the iron levels in the water. If they exceed the acceptable amount, you can install a water softener.

Can You Drink Cloudy Water?       

Your responsibility is to test the well at least several times a year. Even though your well water is cloudy if you have analyzed it and had it corrected. There is minimal likelihood that drinking it would get you sick. The safest choice is to treat your well water; this assures that the water is safe to consume.

Final Thoughts

If you’re wondering about fixing cloudy water, consider that cloudy tap water isn’t necessarily a bad indication.

You must, however, take caution at all times. Your health and safety come first. So, if you anticipate a problem with your water supply, contact a professional right away.

Related Reads: Discover More Content You’ll Love


Exit mobile version